1. Home
  2. BLOCK WEBSITES
  3. HOW CAN THE USER USE NETGEAR ARMOR IN NIGHTHAWK AC3200 TRI-BAND ROUTER

NIGHTHAWK AC3200 TRI-BAND ROUTER (R8000)

NIGHTHAWK AC3200 TRI-BAND ROUTER

Nighthawk AC3200 Tri-band router is built to connect to every device in your home. It automatically and simultaneously attaches to devices like your laptops, tablets, phones smart TV, gaming devices, camera music stream. Now the user also gets the faster speeds up to 3.2 Gbps. It also comes with six high powerful antennas, so it covers all corners of your home. Now your router has 1 GHz dual-core processor and three offload processors. Here the user also gets automatic hassle-free backups. You can also use Netgear Armor for cybersecurity for your home, and the user can also use circle smart parental controls. Now you can also pause the internet and enjoy family time. Here you can also block websites and access guest networks. You can also use the Amazon Alexa for voice commands for the router. You can also use the Nighthawk app to handle all devices.


WEB DOMAIN SETUP OF NIGHTHAWK AC3200 TRI-BAND ROUTER

 

  • The user can now open the box of Nighthawk AC3200 Tri-band router.
  • Here the user also attaches the antennas with the router.
  • Now the user places the router at the best location in your home or office.
  • You can now also check the internet signals of your network.
  • In case the signals are not working, then contact your ISP provider.
  • Unplug the modem too.
  • The user can also attach the power adapter with the router.
  • Here your router has power.
  • If you see it still off, then the user can push the power button of the router.
  • Use the ethernet port and connect your laptop, modem, and the router.
  • Open the web browser.
  • The user can now write www.routerlogin.net or the IP address is 192.168.1.1
  • You can now use the username as the admin and the password as the password.
  • There is a welcome note on the screen.
  • After this, the user can also enter the information of country, place, and language.
  • Here the user can also scan the wifi.
  • Now your scanning of wifi finished. 
  • If not, then the user enters the wifi.
  • The user can use the router.

SETUP OF NIGHTHAWK AC3200 TRI-BAND ROUTER WITH NIGHTHAWK APP

 

  • Now the user opens the box of Nighthawk AC3200 Tri-band router.
  • Attach the antennas with the router.
  • Here the user can set the router in the right position.
  •  You can also see your network is working.
  • The user can also check the speed of the net.
  • If it is slow, then you can try to fix it too.
  • Connect the power adapter with the router.
  • Now the power of the router is on.
  • If it is still off, then the user can push the power button of the router.
  • The user now opens the play store on any device.
  • Select the Nighthawk app from the play store.
  • Download and install it.
  • Type all the details of your router.
  • Here is the QR code on the router.
  • You can scan it.
  • It also catches the settings.
  • Now your router is ready.

LOG IN TO NIGHTHAWK AC3200 TRI-BAND ROUTER

 

  • Launch a web browser.
  • Now you can write www.routerlogin.net or the IP address is 192.168.1.1
  • Here the user applies the admin for username and the password as the password.
  • You can log into the advanced settings.

NETGEAR ARMOR IN NIGHTHAWK AC3200 TRI-BAND ROUTER

 

  • Launch the play store on your device.
  • Now download the Nighthawk app.
  • Enter all information on your router.
  • Go to the settings.
  • Tap on security.
  • Here is the Netgear Armor.
  • Now the Netgear Armor page shows on screen.
  • Log in with the Netgear account.
  • You can now activate it.
  • The user can now use the Netgear Armor feature.
  • Your router is now encrypted.

FIRMWARE UPDATE OF NIGHTHAWK AC3200 TRI-BAND ROUTER WITH WEB DOMAIN

 

  • Launch the web browser.
  • You can also write www.routerlogin.net or the IP address is 192.168.1.1
  • Now the user can also use the username as the admin and the password as the password.
  • The user can now go to advanced settings.
  • Tap on the firmware update.
  • Wait for three seconds.
  • Your router has now updated the firmware with security patches.

FIRMWARE UPDATE OF NIGHTHAWK AC3200 TRI-BAND ROUTER WITH NIGHTHAWK APP 

 

  • Launch the Play store on any device.
  • Choose the Nighthawk app.
  • You can also download and install it.
  • Enter all details of your router.
  • Tap on the settings.
  • Hit on the firmware update.
  • Now your router has the latest firmware.
  • You can also get the many new security patches.

SOFT RESET OF NIGHTHAWK AC3200 TRI-BAND ROUTER

 

  • Open the web browser.
  • Now you can also use www.routerlogin.net or the IP address.
  • Here the username is admin, and the password is password.
  • Tap on the advanced settings.
  • Check the factory reset.
  • Hit on it.
  • Your Nighthawk router is in default settings.
  • Repeat the same method for the set up of your router.

HARD RESET OF NIGHTHAWK AC3200 TRI-BAND ROUTER

 

  • The user can also locate the reset buttons on the router.
  • Now the user can also hold the reset button with a paper clip for two seconds.
  • You can now see the light is blinking.
  • Release the reset button.
  • Lights are also calm now.
  • Your router is also in default settings.
  • Now you can also repeat all the methods of the setup of the router.
Previous Post
HOW CAN YOU CONFIGURE DYNAMIC QoS FEATURE IN NIGHTHAWK X6S TRI-BAND ROUTER
Next Post
IN WHICH WAY THE USER RECOVER ADMIN PASSWORD IN NIGHTHAWK R7200 WIFI ROUTER

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu
[click_to_call id="315"]